2005-2010 TACOMA RUNNING BOARD REPAIR

download
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:- — Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). — Safety (eye protection, rechecking torque procedure, etc.). — Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). — Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). Please see your Toyota dealer for a copy of this document. 1. Remove Running Board from Packaging. (a) Remove running board assembly from package and place on a clean protected surface. The boards are sided (Fig. 1-1) (b) Verify kit contents and inspect the running board for damage. 2. Running Board Preparation for Installation (LH/RH Side). (a) Verify hardware bag content by referring to the cover page of this instruction sheet. (b) Loosen the 1/4 – 20 flange nuts at each of the three (3) bracket locations on each running board. (Fig. 2-1) (c) With a small slotted screwdriver, remove the plastic plugs covering M8 weld nuts in body of vehicle at 6 points/side.

Incoming search terms:

• pw 80 running too rich